 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||
 |
|
||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
 |
|
||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
Polyethylene Encasement: ShoreMaster floats are manufactured from linear, virgin polyethylene resin containing UV inhibitors and carbon black pigment to protect against ultra violet degradation. This resin offers a balance of toughness, rigidity, environmental stress, crack resistance and low temperature impact performance unmatched by any other material. A nominal wall thickness of .15” is standard on all ShoreMaster floats unless a specific wall thickness is requested. Shoremaster’s polyethylene resin is a food grade material in compliance with the FDA Title 21. As a food grade material, you are ensured that the float will not contaminate the waterway. The polyethylene resin is included in Underwriters Laboratory Class 746C and flame class UL-94HB. The molded encasements also meet the Hunt Falling Dart puncture and thickness test. The polyethylene shell will conform to the following properties: |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
All ShoreMaster
floats are filled with expanded polystyrene (EPS) beads. The EPS
foam has a 0.9 to 1.2 pound per cubic foot density with water absorption
not to exceed 3.0 pounds per cubic foot as determined in accordance
with the Hunt absorption test. |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
 |
|
